The 38″ Perforated AG Panel is used for Soffit venting, Interior “Sound Barrier” Panels, and “Skirting” around the bottom of Trailer Homes. Post & Frame / Metal Building Contractors and Suppliers…now there is a way to perforate the ¾” high x 5 rib wide Ag Panels.Get more news about Cuber Perforator Machine,you can vist our website!

Complete with four (4) sets of perf dies with four (4) rows between the minor ribs for the 29 – 26 ga AG Panels, oiler kit to lubricate dies, and HD 110 volt electric – gearbox drive. Male perfs will be on the topside of the Ag Panel – same as the ribs on the panel! You can also use it to perforate your flat stock material by adjusting the width of the perf dies to ventilate 29 – 24 gauge steel so you can post process any other products that you may need. SA PERF Stand Alone Perforation Machine for Ridge-Soffit Venting This machine is a real time saver to your production requirements allowing you to perforate metal on your schedule and not someone else’s!

The Stand Alone Perforation Machine is ideal to perforate your metal for Ridge Cap venting and Soffit area venting. It can accept up to 24″ wide sheet stock in 24 – 26 ga. Steel, .032″ Aluminum, and 12 – 24 oz. Copper. With a quick adjustment it can also perforate 1″ deep preformed soffit panels similar to our FL105 profile. The Perf Dies (Two (2) Sets with each set having Four (4) rows) are adjustable up/down and side to side, oiler kit to lubricate the dies. Powered by a heavy duty 110 Volt 1 Phase Electric Gearbox.