Two Step Authentication

When the inflatable life raft is used, the raft and the storage cartridge can be thrown directly into the water. The life raft can be automatically inflated. When the ship sank too fast under the water, it is too late to throw it into the water surface. The hydrostatic pressure release on the raft will automatically remove and the emergency inflatable life raft will be released, floated automatically.

The detailed steps as follows

1.Take the hook opening on the hydrostatic pressure release and launch the small ring, making the chain hook fall, or rotating the manual release device, and the raft will slide to the sea.

2.When the height is less than 11m from the water surface, or when the raft is thrown into the water, it is necessary to continue to pull out the first cable and open the valve of the inflatable cylinder, so that the raft is floated above the seawater.

3.If there is an overturned state, it should be centered. The person should wear a life jacket, and climb the bottom of the raft. When standing in the steel bottle, the hands pull the bottom, squatting and hypokinesis.

The Installation Of Inflatable Life Raft

When the inflatable life raft is folded, it is stored in the glass steel storage cartridge. Generally, it is generally arranged on the two-port boards. When installing, the raft is welded to the ship deck, ensuring that the storage cartridge is in the hierarchical position, and the fix is with the kundy which is connected to the raft and the manual detachment assembly. The assembly components are connected to the hydrostatic pressure release.

1. The bowline that is taken from the life-saving raft cylinder, is firmly connected to the hydrostatic pressure release ring, and there is an easy-to-break rope on the connecting ring, and the other end of the easy-to-break rope should be connected in the hydrostatic pressure release.

2. It is not allowed to pull the bowline from the storage cartridge.

What Should Be Paid Attention To The Use Of Inflatable Life Raft

1. When the life raft is drifting too urgently, the sea anchor can be put into water and reduce the rafting speed.

2. in order to avoid the wind and waves, the enter-exit door should be put down, and the duty for looking out will be strengthened through the hoping window on the raft hanger.

3. If there is water in the raft, take out the water scoop from the repair bag and drain it with the absorbent sponge.

4.In the night, using the flashlight to emit a Mousta signal, during the day, the mirror is transmitted by the sunlight.

5. When it is raining, utilize the drinking water bottle and the water pipe and deposit the rainwater to prepare for drinking.